Depth Alarm; Fish Id Alarm; Low Battery Alarm - Humminbird 917C Installation And Operation Manual

becomes equal to or less than the menu setting.
To change the Depth Alarm setting:
1. Highlight Depth Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Depth Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters
[International models only], Default = OFF)
900 Series™ detects fish that correspond to the alarm setting. Fish ID Alarm
will only sound if Fish ID+™ is on.
For example, if you've set the Fish ID Alarm to sound for Large fish
only, the Fish ID alarm will sound when a large-sized fish is detected.
Off
All
Large/Medium
Large

Depth Alarm

Depth Alarm sounds when the depth

Fish ID Alarm

Fish ID Alarm sounds when the
To change the Fish ID Alarm setting:
1. Highlight Fish ID Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish
ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)
battery voltage is equal to or less than the menu setting. The battery alarm
will only sound for the battery that is connected to the 900 Series™. The Low
Battery Alarm should be set to warn you when the battery voltage drops
below the safety margin that you have determined. For instance, if you are
running a trolling motor (battery operated), you would want to set the Low
Battery Alarm to sound before the battery voltage drops too low for it to be
used to start your main, gasoline-powered engine.
To change the Low Battery Alarm setting:
1. Highlight Low Battery Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Low Battery Alarm setting. (Off, 8.5V - 13.5V, Default = Off)
98

Low Battery Alarm

Low Battery Alarm sounds when the input