Table of Contents
Advertisement
Add or Remove a Trolling Grid: From the Waypoints submenu (accessed from the Navigation main menu), select
Grid and press the RIGHT Cursor key to display a list of waypoints. Select the waypoint to which you want to add
the grid. The trolling grid will appear on all of the navigation views, and can be used as a guide when trolling
around a waypoint. The grid can be rotated to any desired heading using Grid Rotation from the Navigation Main
menu. To remove the trolling grid, choose Remove Grid from the Navigation X-Press™ Menu.
15
1
2
1
Next Waypoint
2
Course: the current direction the boat is traveling
measured in degrees from North.
Bearing: Direction to Destination Waypoint
3
measured in degrees from North
4
XTE (Cross Track Error): Distance of Boat from Route
5
Speed: the measurement of the boat's progress across
a given distance; the speed measurement provided by GPS.
6
NEXT: Next Waypoint in the Route
7
TTG: Time to Go to Waypoint
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a grid to a new
waypoint, the original waypoint will lose its target or grid.
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the trolling grid is the
same as the length of the scale bar on the left edge of the display. Zooming in or out will decrease or increase
the spacing, respectively.
Chart View with Grid
11
4
3
14
13
12
10
5
56
9
6
7
8
DTG: Distance to Go to Waypoint
Cartography
Track
Waypoint Trolling Grid
Boat Icon
Route
Waypoint in declutter mode
Map Scale
8
9
10
11
12
13
14
15
Advertisement
Table of Contents
