Table of Contents
Advertisement
X6DVA-4G/X6DVA-EG User's Manual
PCI Express Configuration
This section allows the user to configure PCI Express slots.
Active State Power Management
Select Enabled to activate the function of power management for signal
transactions between PCI Express L0 and L1 Link. The options are Enabled
and Disabled.
I/O Expander Mode
This feature allows the user to set the IO Expand Mode for Hot Plug sup-
port. The options are PCA9555, Two PCA9554, One PCA9554 (Low), One
PCA9554 (High),
PCA9554.
PCI Express Port2 (PXH)
This feature allows the user to configure the PCI Express slot. The options
are Auto, Enabled, and Disabled.
PCI Express Port3 (Slot 4)
This feature allows the user to configure the PCI Express slot. The options
are Auto, Enabled, and Disabled.
PCI Express Compliance Mode
Select Enabled to enable MCH to activate PCI Express Compliance Mode.
The options are Disabled and Enabled.
Spread Spectrum
Select Enabled to enable Spread Spectrum. The options are Disabled and
Enabled.
Remote Access Configuration
You can use this screen to select options for the Remote Access Configu-
ration. Use the up and down <Arrow> keys to select an item. Use the
<Plus> and <Minus> keys to change the value of the selected option.
Remote Access
This feature allows the user to disable the function of Remote Access. If
Disabled is not select, then you can select a Remote Access type. The
options are Enabled and Disabled.
Two PCA9554A, One PCA9554A (Low), and Two
4-16
Advertisement
Table of Contents
