Floppy Configuration - Supermicro Supero X6DVA-4G User Manual

X6DVA-4G/X6DVA-EG User's Manual
32Bit Data Transfer
Select "Enabled" to activate the function of 32-Bit data transfer. Select
"Disabled" to deactivate the function. The options are Enabled and Dis-
abled.
Hard Disk Write Protect
Select Enabled to enable the function of Hard Disk Write Protect to prevent
data from being written to HDD. The options are Enabled or Disabled.
IDE Detect Time Out
This feature allows the user to set the time-out value for detecting ATA,
ATA PI devices installed in the system. The options are 0 (sec), 5, Mode 1.0,
15, 20, 25, 30, and 35.
ATA(PI) 80Pin Cable Detection
This feature allows AMI BIOS to auto-detect 80Pin ATA(PI) Cable.
options are:"Host & Device", "Host" and "Device."

Floppy Configuration

This option allows the user to configure the settings for the Floppy Drives
installed in the system.
Floppy A
Move the cursor to these fields via up and down <arrow> keys to select
the floppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4",
720 KB 3½", 1.44 MB 3½", and 2.88 MB 3½".
OnBoard Floppy Controller
Select "Enabled" to enable the Onboard Floppy Controller. The options are
"Disabled", and "Enabled."
4-8
The