Table of Contents
Advertisement
Upgrade/Reboot
1.
From the Setup menu, select the
<System (
)> tab.
2.
Click [Upgrade/Reboot].
3.
Select a desired item and set it
appropriately.
Upgrade : Performs upgrading the
system.
Factory default : Resets the system
to the factory default.
-
Except network parameter : Reset
the other settings except for the interface/port/DDNS/IP filtering settings.
-
All : Resets all settings including the camera settings. (however, the log
information will not be reset)
If you reset all settings, the IP address will be defaulted to 192.168.1.100.
Configuration backup & Restore : Backs up the current system settings before
performing the restoration process.
Restart : Restarts the system.
To perform the upgrade
1.
Click [Upgrade].
2.
Click [Browse] and specify a file to
upgrade.
3.
Click [Send].
4.
The "Upgrade" dialog appears where
the progression will be shown in the
bottom.
M
If you forcibly terminate the upgrade
process, upgrade will not be completed
properly.
English _53
Advertisement
Table of Contents
