overview
Components
a
b
Item
a
Reset Button
b
Tilt Screw
c
Lock Release
d
Ceiling Cover
16_ overview
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
Resetting the camera IP address, subnet mask, gateway address etc.
requires the use of the IP Installer software application.
Used to adjust or fix the tilt of the lens.
To separate the bracket from the main unit for the installation or to
separate the camera from an installed camera, push this release and turn
the main unit in the marked direction of <UNLOCK>.
Remove this for wiring purposes if you intend to install the camera on the
ceiling.
c
d
Description