Samsung SNB-1000 User Manual page 32

network connection and setup
Setting up Port Range Forward for several network cameras
When several network camera connect to one IP router device, you should forward the
TCP 943 port of the router to the TCP 943 port of a connected camera.

J
If you don't set properly the TCP 943 port of the router, you cannot get any video stream from
the web page of the camera.
TCP 943 port is a port for the Silverlight policy server of a camera.
When Camera1 and Camera2 are connected to a router :
User
Start End
943 943
3000 3000
3001 3001
4520 4520
4251 4521
8000 8000
8001 8081
You can set a rule of Port Forwarding on the IP router device through its configura-
tion web page.
You cannot change the Sliverlight policy server port of a camera. This value is fixed
internally.
You can change the ports of the camera except the policy server port through its
configuration web pages.
32_ network connection and setup
Internet
IP router
Protocol IP Address
TCP 192.168.1.100
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
Camera1 (192.168.1.100)
Web Server Port 8080
VNP Port 4250
RTSP Port 3000
Policy Server Port 943
Camera2 (192.168.1.101)
Web Server Port 8081
VNP Port 4251
RTSP Port 3001
Policy Server Port 943