Table of Contents
Advertisement
CONNECTING THE CAMERA TO AN IP ROUTER WITH THE
PPPOE/CABLE MODEM
This is for a small network environment such as homes, SOHO and ordinary shops.
Camera
Camera
Local PC
Configuring the network settings of the local PC connected to an
IP router
Configuring the network settings of the local PC connected to an IP router, follow the
instructions below.
Select : <Network Neighborhood>
<Properties>
<Obtain an IP address automatically> or <Use the following IP address>.
Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the IP router is 192.168.1.1
IP address : 192.168.1.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
ex2) If the address (LAN IP) of the IP router is 192.168.0.1
IP address : 192.168.0.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1
IP address : 192.168.xxx.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.xxx.1
M
For the address of the IP router, refer to the product's documentation.
Refer to the "Port Range Forward (Port Mapping) Setup" section of the IP Router's
documentation. (Page 31)
PPPoE or
IP Router
Cable Modem
<Properties>
<General>
<Internet Protocol (TCP/IP)>
INTERNET
PPPoE or
Cable Modem
DDNS Server
(Data Center, KOREA)
<Local Area Connection>
External Remote
PC
<Properties>
English _25
Advertisement
Table of Contents
