Table of Contents
Advertisement
.
6.6.6 Date and Time
This link refers to a page, where the internal real-time clock of the IP-KVM switch can be set
up (see Figure 6-32). You have the possibility to adjust the clock manually, or to use a NTP
timeserver. Without a timeserver, your time setting will not be persistent, so you have to
adjust it again, after IP-KVM switch loses power for more than a few minutes. To avoid this,
you can use a NTP timeserver, which sets up the internal clock automatically to the current
UTC time. Because NTP server time is always UTC, there is a setting that allows you to set
up a static offset to get your local time.
There is currently no way to adjust the daylight saving time automatically. So you
have to set up the UTC offset twice a year properly to the local rules of your country.
Figure 6-32. Date and Time
Warning
77 / 92
8/16-Port KVM over IP Switch
Advertisement
Table of Contents
