Initial Ip Configuration - P-Link Computer KVM-MU108AP User Manual

8 port Rack Mount PS/2 IP-KVM switch:
SERIAL PORT
LOCAL CONSOLE
LAN
USB
POWER
DAISY CHAIN
RESET
Figure 1-1. The connectors of 8port PS/2 IP KVM switch
O:Remote access
P:Power on of a PC
Figure 1-2. The front panel of 8port PS/2 IP KVM switch
16 port Rack Mount PS/2 IP-KVM switch:
Green LED：Display Link Status
Orange LED：Display Speed Status (10/100Mbps)
Figure 1-3. The connectors of 16port PS/2 IP KVM switch
Figure 1-4. The front panel of 16port PS/2 IP KVM switch

1.3 Initial IP configuration

In factory default, DHCP mode is disabled (IP auto configuration = None), and the IP settings
are as below:
IP address
Subnet mask
Default Gateway
PC PORT
192.168.1.22
255.255.255.0
None
7 / 92
8/16-Port KVM over IP Switch