Drain Pump - Asko D5132 Use & Care Manual

Cleaning

Drain pump

The pump can be accessed from inside the
machine.
1. Cut the power to the machine by pulling out
the plug!
2. Remove the coarse filter and pipe section.
3. Remove the small fitted piece at the left of
the bottom drain (see the image below).
4. You can release and turn the pump blade by
inserting your finger into the hole and release
anything blocking it.
5. Reinstall the fitted piece and filters.
6. Plug the plug into the wall socket.
If the machine still does not start and a buzzing
sound is heard, the overflow guard has been
activated.
• Shut off the water.
• Pull the plug out from the wall socket.
• Call the service division.
0
NOTE!
Do not forget to reinstall the fitted piece.
The spray arms
Lower spray arm
Holes and bearings can sometimes become
blocked.
1. Pull the lower washer arm straight up to
release it.
2. Remove any deposits using a needle or simi­
lar.
The washer arms also have holes under neath.