Miele G 6160 Operating Instructions Manual page 68

Problem solving guide
Problem
The In-operation
indicator is flashing
quickly.
The buzzer is sounding.
All the programme
indicators flash when
the door is open.
Fault code  shows in
the display.
Fault :
The buzzer is sounding
continuously.
The drain pump may
also be running, even
with the door open.
Fault :
68
Cause and remedy
There may be a technical fault.
 Switch the dishwasher off with the  button.
 Switch the dishwasher back on after a few
seconds.
 Select the programme you want.
 Close the door.
If the indicator lights flash again, there is a technical
fault.
 Call the Miele Service Department.
The Waterproof system has reacted.
 Close the stopcock.
 Call the Miele Service Department.
A fault has occurred in the circulation pump.
 Switch the dishwasher off for at least 30 seconds
with the  button.
 Switch the dishwasher back on.
 Select the programme you want.
 Close the door.
If the fault message appears again, there is a
technical fault.
 Call the Miele Service Department.