Clarion DXZ945MP Owner's Manual page 50

TV Operations
2. Touch and hold A-STORE for 2 seconds or
longer.
The MODE display changes to "A-STORE"
and the preset No. in the auto-store
operation appears on the preset No. display.
*
Stations with good reception are
automatically searched, and are stored to
preset memory (No.1 to No.6) in order
from the station having the lowest
frequency.
Notes:
• When auto store is performed, stations stored to
memory so far are cleared.
• When there are fewer than
6
stations with good
reception, low frequencies are automatically
returned to, and auto store is performed agah If
there are fewer than 6 stations even after auto
store is performed twice, stations stored so far
remain in memory.
Preset scan
Preset scan is a function for receiving stations in
the order that they are currently stored to preset
Nos. so that broadcasts can be checked.
1. Touch MODE.
2. Touch P-SCAN.
The MODE display changes to "P-SCAN"
and the preset No. in the preset scan
operation is displayed in the preset No.
display.
*
The currently stored stations are received
in order for 7 seconds or longer each.
Stations with poor reception are skipped,
and the next station is received.
TV stations are received as follows:
TV1 (1 ... 6) ... TV2 (1 ... 6) ... and so
forth.
• To cancel the preset scan
1.
Touch P-SCAN.
The P-SCAN display changes to "MODE",
and the stations that were being received
when P-SCAN was touched are received
next.
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Touch MODE.
Touch and hold MODE for 1 second or
longer.
The preset memory list is displayed.
2. Touch the station you want to listen to.
* The station can also be tuned by touching
-t
I.W!J
l'
at a preset No. -
Preset memory
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory
for later recall.
1. Touch BAND to switch the reception band.
2. Operate the channel display to select the
station to store to.
3. Touch and hold MODE for 1 second or
longer.
The preset memory list is displayed.
4. Touch and hold the preset No. to store for 2
seconds or longer.
You will hear a long beep, and the station is
stored in memory.
If you hear a short beep, the station is not
stored to memory. Repeat the procedure
from step 1.
Recalling
a
preset station
This function allows the user to select a preset a
preset station.
• To cancel tuning
1. Touch RTN.
I
1.
50
DXZ945MP