Access User Setup; How To Add A User - Honeywell 6280 Series User Manual

Access User Setup

Access User Setup as follows:
ICON
1. From the "Home" screen, touch the
Setup icon.
2. Touch the System Setup icon.
3. Touch the USER SETUP icon.

How to Add a User

ICON
1. From the "User Setup" screen, touch the
ADD USER icon and enter your Authorized
Code.
2. Touch the box next to Enter User Name.
3. Type in the user name (6 characters
max.; no spaces between characters) and
touch the OK icon.
4. Touch the box next to User Number.
5. Touch the box next to Enter User Code.
6. Enter the 4-digit User Code for this user.
7. Touch the box next to RF Button Zone (if
used); enter the 3-digit RF Button Zone
for this user.
8. Touch the Save icon.
ACTION
ACTION
•
• Use the BS (Backspace) key to make corrections.
• The @#$ key is not available for use at this time. These characters cannot
The authorized code for adding users is dependent upon the alarm panel you
are interfacing with. Check your alarm panel Installation and Setup Guide to
determine who can add users.
Select the partitions, access level, and enter a user number for this user.
If assigning this user to wireless key, enter one of the zone numbers of the
key fob (the wireless key must be programmed first before it can be assigned
to a user).
NOTES
NOTES
Use the Shift key for capital letters
be saved to the control panel.
25
User Setup (cont'd)