Honeywell 6160V - Ademco Talking Alpha Display Keypad User Manual

This document provides Operating Instructions for your Keypad's voice features. Refer to your
security system User Guide for all other security system functions and operating procedures.

Message Center

The ADEMCO 6150V/6160V Keypads feature a
voice message center that lets you record and
playback one message.
• The message can be up to 2.5-minutes long
• The message remains in the Keypad's memory
until a new message is recorded.
• The volume control of the message is adjustable.
• Refer to the procedures below when using the
Message Center functions.
To record a message: Press [#] FUNCTION + [0] VOICE + [1] RECORD keys.
To end recording:
To play a message:
To adjust the volume: Press [#] FUNCTION + [0] VOICE + [2] VOLUME keys,

USER GUIDE

The red MESSAGE indicator will light, indicating record in progress.
Note : A message cannot be recorded during the Exit Delay period.
Press [1] RECORD key.
The red MESSAGE LED will flash indicating a message waiting to be
played. After the message is played once the MESSAGE LED will go
out.
Press [#] FUNCTION + [0] VOICE + [3] PLAY keys.
The recorded message plays and the red MESSAGE LED turns off. The
recorded message will remain in memory until a new message is
recorded.
then press the desired volume control key [3] ↑ (up) or [6] ↓ (down).
Note:
•
Adjusting message volume also adjusts status volume. Volume
cannot be adjusted while playing a message.
•
Each time you enter the command to adjust the volume, the word
"CHECK" will be heard to verify the current setting.
K0022UGV1 12/01 Rev. B
ADEMCO 6150V & 6160V
Voice Remote Keypad
LCD RECORD
SPEAKER DISPLAY KEY
1
ARMED
OFF
RECORD
4
LEDs
READY MAX
7
MESSAGE INSTANT
READY
MIC
STATUS
MICROPHONE VOICE
STATUS
KEY KEY
(Continued on Other Side)
PLAY KEY
AND
VOLUME
KEY UP VOLUME
2 3
AWAY STAY
VOLUME PLAY
5 6
TEST BYPASS
8 9
CODE CHIME
0 #
VOICE FUNCTION
FUNCTION DOWN
KEY VOLUME