Before You Start; Height Adjustment - Huffy In-Ground Basketball Owner's Manual

To ensure optimal playability of backboard system, a close tolerance fit between the elevator components and
hardware is required. Test-fit large bolts into large holes of elevator tubes, backboard brackets, and triangle plates.
Carefully rock them in a circular motion to ream out any excess paint from holes if necessary.
HEIGHT
ADJUSTMENT
Rotate crank
handle to raise
and lower
backboard.
Do not over crank
handle beyond the
manufactured height
indicator range of
7-1/2 - 10 feet.
Damage may be
caused to the screw
jack's internal
adjustment
mechanism if
adjusted over 10 or
under 7-1/2 feet.
MOVING SYSTEM
1. While holding pole, rotate basketball sytem
forward until wheels engage with ground.
2. Move basketball system to desired location.
3. Carefully rotate basketball system upright.
4. Check system for stability.
1
2
3
568090
Adult Assembly Required. Dispose of ALL packaging materials promptly. As with all products, periodically inspect
ALL basketball systems, including those used for DISPLAYS, MUST be assembled and installed according to
instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a
ID# M6809011

BEFORE YOU START

NOTE: Not all items pictured are included with every model.
33
A
B
11/06
NOTICE TO ASSEMBLERS
Assembled unit MUST be filled with sand or water at ALL times.
makeshift support system.
12/06
for loose small parts.
2