H. Audio [1-8]
This is a menu for setting the control register of Voiceband Baseband Codec chip.
Although the actual value can be written over, it returns to default value after switching off and on
the phone.
• VbControl1 [1-8-1] : VbControl1 bit Register Value Setting
• VbControl2 [1-8-2] : VbControl2 bit Register Value Setting
• VbControl3 [1-8-3] : VbControl3 bit Register Value Setting
• VbControl4 [1-8-4] : VbControl4 bit Register Value Setting
• VbControl5 [1-8-5] : VbControl5 bit Register Value Setting
• VbControl6 [1-8-6] : VbControl6 bit Register Value Setting
I. DAI (Digital Audio Interface) [1-9]
This menu is to set the Digital Audio Interface Mode for Speech Transcoder and Acoustic testing.
• DAI AUDIO [1-9-1]
• DAI UPLINK [1-9-2]
• DAI DOWNLINK [1-9-3] : Speech decoder test
• DAI OFF [1-9-4]
10.2 RF Test [MENU 2]
Radio Frequency Test
A. SAR Test [2-1]
This menu is to test the Specific Absorption Rate.
• SAR Test On [2-1-1] : Phone continuously process TX only. Call-setup equipment is not
required.
• SAR Test Off [2-1-2] : TX process off
: DAI audio mode
: Speech encoder test
: DAI mode off
- 117 -
10. ENGINEERING MODE