Getting Started; Removing Packaging; Connections - Sony CDR-W66 Operating Instructions Manual

Removing Packaging

This CD Recorder comes with the following items:
• Remote Control (remote) RM-CW1 (1)
• R6 (size-AA) batteries (2)
• Control-S connector cable (1)
If any of the above items are not enclosed, contact your
Sony dealer, or the Sony Service Center.
Inserting Batteries into the Remote
Insert two R6 (size-AA) batteries (supplied) with the
+ and _ properly oriented to the markings into the
battery compartment.
z
Under normal conditions, the batteries should last for
about six months.
When the remote no longer operates the recorder, replace
both batteries with new ones.
Caution
• If the batteries are inserted correctly, there is a danger of
leakage or damage. Be sure to observe the following:
— Insert the batteries with the ' and ' terminals correctly
oriented.
— Do not use a new battery with an old one.
— Do not recharge the batteries.
— If not using the remote control for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
— If the batteries are leaking, wipe clean the battery holder,
and then replace with new batteries.
• When using the remote control, do not expose the remote
sensor to direct sunlight or a lighting apparatus. Doing so
may cause a malfunction.
Installation Precautions
Use of the product at a high temperature may shorten
the life of the product or cause a trouble in correct
recording or playback on a disc.
• For efficient radiation, keep a sufficient space around the
product and avoid placing anything on the top of the
product.
• Keep away from exothermic devices during installation.

Getting Started

Connections

Connection Precautions
Before making connections, turn OFF the power
supply to all devices. Insert all plugs firmly, as an
improper connection may cause hum and noise. Use a
cable with sufficient length to ensure that the plug
does not come use due to shock or vibration.
Device connection example
External
control
component
External
control
Mixer
component
OUT IN
DIGITAL
COAXIAL
OUT IN
OUT
Mixer
component
DIGITAL DIGITAL
OPTICAL OUT OPTICAL IN
Digital
component
ç : Flow of signal
Keyboard connection and settings
Refer to Keyboard Jack, page 32.
Remote or
control component
CDR-W66
External
synchronizing
system
DIGITAL
COAXIAL
IN
Digital
DIGITAL
DIGITAL
OUT
IN
Digital
component
5