Functions Of Check Key; Setting Copy Bits - Sony CDR-W66 Operating Instructions Manual

Other Functions

Functions of CHECK Key

You can press the CHECK key to display AES/EBU
input, Word Sync input, AES/EBU output setting, and
auto pause setting for confirmation.
Each time you press the CHECK key, you can change
the display in order. If you don't press other key
during display, normal display is automatically
returned at the constant number of seconds.
n
Normal display mode
Each item displays the content below.
AES/EBU In
Display the mode of the signal input to the AES/EBU
input terminal.
If AES/EBU input is not used for recording or
synchronous operation, it is also displayed.
Display mode
Unlock
Nonaudio
Example:
44.1 [kHz]
48.0 [kHz]
Word Sync
Display the mode of the signal input to the Word Sync
input terminal.
If word input is not used for synchronous operation, it
is also displayed.
Display mode
Unlock
Example:
44.1 [kHz]
48.0 [kHz]
28
AES/EBU In
Word Sync
AES/EBU Out
|
Lch Rch
Auto Pause
Meaning
No signals are input.
Reception is not performed properly.
A signal other than PCM audio data is
input.
A synchronizable signal is input.
Display indicates the sampling
frequency.
Meaning
No signals are input.
Reception is not performed properly.
Word clock frequency does not
conform to the specification.
A synchronizable signal is input.
Display indicates the sampling
frequency.
AES/EBU Out
Display the setting of the current AES/EBU output
mode set in the Setup menu.
Change the setting in the Setup menu.
For operation details, refer to page 33, "Setup Menu
Operations."
L ch | R ch
The level meter in the display window is displayed
with a numeric. This can be used during level
adjustment.
|
Example: L ch
–20.0 –20.0
The left side indicates CH-1 (L) level and the right side
indicates CH-2 (R) level. The level is displayed in 1 dB
steps at – ∞ to –24.0 dB and in 0.5dB steps at –24.0 dB
to 0 dB.
Auto Pause
Display the state of current setting for Auto Pause.
Change the setting with the A-PAUSE (Auto Pause)
key.

Setting Copy Bits

You can select the copy bits (copyright bits) which
identify whether digital copy is permitted for the discs
recorded by the CD recorder.
The three types of setting are available. The tracks or
discs recorded in each setting operate as below when
they are recorded by the device which conforms to the
serial copy management system (SCMS).
Display
PreRecorded Digital copy for one generation only is
possible for the track or disc recorded in
this setting.
(This setting conforms to the same copy bit
specification as for music CDs on the
market, of which copyright is protected.)
Inhibit Inhibition: Digital copy from the track or
disc recorded in this setting is impossible.
(This setting conforms to the same copy
specification for the track or disc copied
digitally for one generation by an SCMS
device.)
Permit Permission: Digital copy for any number
of generations is possible for the track or
disc recorded in this setting.
(This setting conforms to the copy bit
specification with no copyright protection
(free).)
For operation details, refer to page 33, "Setup Menu
Operations."
R ch
Description