Configuring The Idle Time - D-Link DSL-200 User Manual

Configuring the Idle time

You can configure the idle time to automatically disconnect the connection after there is no package
passing through the connection for the specified period of time by performing the following steps:
1. From the Windows desktop double-click on the D-Link Dial-Up PPP Connection icon while
you are not using this connection to bring up the properties window.
2. In the D-Link Dial-Up PPP Connection window, choose Options tab. Select the idle time out
period from Idle time before hanging up drop-down list and then click OK.
DSL-200 ADSL USB Modem User's Guide
Double Click
38