Audiovox VME 9725 NAV Owner's Manual page 94

System Reset
To correct a system halt or other illegal operation, use the
tip of a pen to press the reset button located over the rotary
encoder. After a system reset, the unit restores all factory
default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the
reset is complete.
Image/Display Settings
Video Output Modes
The following table shows the video output mode for each playing source.
Playing Source
AM/FM TUNER
DVD
AUX IN
*CVBS – Composite Video Baseband Signal
Parking Brake Inhibit
When the pink "Parking" wire is connected to the vehicle Parking Brake circuit, the
front TFT monitor will display video when the Parking Brake is engaged. (When the
pink wire is grounded via the Parking Brake circuit, video will be displayed.)
Video Output Modes
Video Output Modes
RGB Mode
YCbCr Mode
CVBS* Mode
94
[RESET] Button