Webasto BBW 46 Installation Instructions Manual page 12

Webasto water heaters installation instructions
Hide thumbs Also See for BBW 46:
Table of Contents

Advertisement

BBW 46 / DBW 46
Installation of Antenna
NOTE:
Preferably, the antenna should be installed in the interior
of the vehicle, at the top in the centre of the windshield or
rear window. If installed at different locations, the range is
likely to be diminished.
For an optimal reception, a distance of 2 ± 0.5 cm from the
windshield edge is to be maintained (Fig. 15). The cable
should be routed upward, beneath the panelling in the ve-
hicle roof and then directed to the right or left to the
chassis member.
NOTE:
In the case of lack of space, the antenna may be installed
up to 15 cm off-centre.
- Clean windshield or rear window using grease-dissolv-
ing cleaner (e.g. methylated spirits).
- Peel off protective film from antenna and glue antenna
in place.
Antenna
±
2
Fig 15:
Installation of Antenna
NOTE:
Do neither shorten nor sharply bend antenna cable.
10
- Route antenna cable to receiver.
- Establish plug connection at receiver and tighten con-
nector hand-tight.
- Secure antenna cable using cable ties.
0.5 cm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents