Hunter TYPE 7 Installation And Operation Manual page 12

7 • Completing Your Installation With a Light Fixture (Continued)
Installing the Glass Bowl
7-15. F irst install B10 candelabra bulbs (40
Watt Maximum) into the sockets.
7-16. P lace the glass bowl under the light
fixture. Make certain the pull chains are
through the pull chain openings.
7-17. Place the cover plate up against the glass
bowl. Align the holes in the cover plate
and glass bowl.
7-18. Screw the finial onto the threaded rod
end until tight.
7-19. If the additional pull chains are desired,
then use the breakaway connectors
to attach them to the installed pull
chains.
Breakaway
Connector
Light Bulbs
(B10
Candelabra
Base 40 Watt
Maximum)
Glass Bowl
Pull Chain
Openinig
Cover Plate
Finial
12
42772-01 • 04/17/08 • Hunter Fan Company