JVC KS-FX281 Service Manual page 8

3.1.10 Removing the mecha bracket
(See Fig.10)
• Prior to performing the following procedure, remove the front
panel assembly, bottom cover, front chassis, heat sink, rear
panel, main board, cassette mechanism assembly, head am-
plifier board and relay board.
(1) Remove the four screws L attaching the mecha bracket.
3.1.11 Removing the switch (LCD & key) board
(See Fig.11 to 13)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Remove the four screws M attaching the rear cover on the
back of the front panel assembly.
(2) Release the eleven joints h, the front panel and the rear
cover become separate.
(3) Remove the switch board from the rear cover.
1-8 (No.49869)
Mecha bracket
L
L
Fig.10
M
M
Fig.11
Joint h
Joint h
Fig.12
Switch (LCD & Key) board
Fig.13
L
L
M
M
Joint h
Joint h