Table of Contents
Advertisement
3.1.4 Removing the heat sink
(See Fig.4)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Remove the screw B and two screws C attaching the heat
sink on the left side of the body, and remove the heat sink.
3.1.5 Removing the rear panel
(See Fig.5)
• Prior to performing the following procedure, remove the front
panel assembly and bottom cover.
(1) Remove the two screws D, two screws E and three screws
F attaching the rear panel on the back of the body.
3.1.6 Removing the main board
(See Fig.6)
• Prior to performing the following procedure, remove the front
panel assembly, bottom cover, front chassis, heat sink and
rear panel.
(1) Remove the two screws G attaching the main board on the
top chassis.
(2) Disconnect the two connectors
main board from the cassette mechanism assembly.
1-6 (No.49869)
CN901
and
CN721
on the
C
B
Heat sink
Fig.4
D
F
E
E
Fig.5
CN721
Main board
G
CN901
Fig.6
C
F
D
G
Advertisement
Table of Contents
