Timer Settings; Option Settings - FUNAI 39FD713 Instruction Manual

Timer Settings

You can change Timer setting.
1
Use / to select [TIMER].
TIMER
Move
[Sleep Timer]
The sleep timer can be set for the unit to go to the
standby mode after an incremental period of time.
2
Use / to select [Sleep Timer], then press
OK.
3
Use / to select the time you want, then
press OK.
• You can also set it using the Remote Control. Refer to
"[Sleep Timer]" (p. 11).
• Available options are; Off / 10min / 20min / 30min / 60min /
90min / 120min / 180min / 240min.
[Auto Standby]
You can set the time to turn off the display power
automatically.
In spite of this setting, the unit goes into standby mode
automatically if there is no signal input from the
antenna terminal and no user operation for 15 minutes.
2
Use / to select [Auto Standby], then press
OK.
3
Use / to select the time you want, then
press OK.
• Available options are; Off / 3hours / 4hours / 5hours.
[OSD Timer]
You can set the time to turn off the OSD display.
2
Use / to select [OSD Timer], then press
OK.
3
Use / to select the time you want, then
press OK.
• Available options are; Off / 5sec / 10sec / 15sec / 20sec /
25sec / 30sec.
Sleep Timer
Auto Standby
OSD Timer
Menu Select

Option Settings

You can change other settings.
1
Use
Off
4 H
15s
Exit
[OSD Language]
You can select the preferred on screen language.
2
Use
press OK.
3
Use
want, then press OK.
• Available languages are; English, Thai, Malay, Simplified
Chinese, Arabic, Persian, Indonesian, Vietnamese and
French.
[TT Language]
You can select the preferred teletext language.
4
Use
OK.
5
Use
press OK.
• Available languages are; West Europe, East Europe,
Russia, Arabic and Farsi.
[Aspect Ratio]
You can change TV Screen Display mode.
2
Use
OK.
3
Use
then press OK.
• Available options are: [4:3] / [16:9] / [Zoom1] / [Zoom2] /
[Just Scan] / [Dot by Dot].
• For details, refer to "Picture Format" (p. 12)
[Blue Screen]
If you set to [On], the background screen displays
blue, during no input signal.
2
Use
[On] or [Off] using
/ to select [OPTION].
OSD Language
TT Language
Aspect Ratio
Blue Screen
Key Lock
OPTION
Reset
Software Update(USB)
Move Menu
/ to select [OSD Language], then
/ / / to select the language you
/ to select [TT Language], then press
/ to select the language you want, then
/ to select [Aspect Ratio], then press
/ to select the display mode you want,
/ to select [Blue Screen], then select
/ .
English
West Europe
16:9
Off
Off
Select Exit
21