Playback Mode - FUNAI 39FD713 Instruction Manual

PLAYBACK MODE

503 series
32FD503/ 32FL503/ 29FL503/ 24FL503
If your unit is one of the series, you can play picture
and watch text files from USB flash drive.
713/ 513 series
39FD713/ 32FD513/ 32FL513/ 29FL513
If your unit is one of the series, you can play picture,
music, video and watch text files from USB flash
drive.
Setup for Playback
You must connect the USB flash memory to USB
terminal of this unit (shown below).
1
Press SOURCE to display the input source mode
and use / to select [Media], and then press
OK.
• If you want to exit this mode, select any other input source
mode. Refer to "Switching the Input Source Mode" (p. 12).
• You can check Multimedia Specification. Refer to
"Multimedia Format" (p. 27).
Note for Playback
• The USB flash memory is not supplied with this unit.
• The unit recognises a USB flash memory only.
Do not use a USB hub and an extension cord between the
USB flash memory and the unit.
Always connect the USB flash memory to this unit directly.
• It is not guaranteed that all USB flash memory can be
supported on this unit.
• FUNAI cannot be held responsible if your USB flash
memory is not supported, nor will FUNAI accept any liability
for damage or loss of stored data.
• A USB flash memory that required its own driver or the
device with a special system such as fingerprint recognition
are not supported.
• Be sure to keep a backup copy of the original files on your
device before you play them back on this unit. We have no
responsibilities for damage or loss of your stored data.
• To avoid damaging the USB flash memory and the unit
always turn off the unit before you remove the USB flash
memory.
• This unit is not allowed to use the USB flash memory which
requires external power supply (500 mA or more).
• The unit can recognise up to 198 files including directories
under one directory, and it can recognise the depth of
directory up to 30.
• This unit may not be recognised if the length of the file
names is too long. Only English characters can be
recognised.
• This unit does not support NTFS or the file other than
FAT16 and FAT32 file system. If the file is not supported, an
error message appears.
• When the unit does not recognise the USB flash memory,
try reconnecting it.
• Playing the files recorded with high bit rates, the images can
be interrupted in some occasions.
• This unit does not support external subtitles.
• This unit cannot play back a file which goes over the limit of
file restriction.
• For USB input the maximum resolution display is 1080p.
13