Timer Settings; Option Settings; Osd Language; Auto Standby - FUNAI 39FD713 Instruction Manual

Timer Settings

You can change Timer setting.
1
Use ◄ / ► to select [TIMER].
TIMER
Move
[Sleep Timer]
The sleep timer can be set for the unit to go to the
standby mode after an incremental period of time.
2
Use ▲ / ▼ to select [Sleep Timer], then press
OK.
3
Use ▲ / ▼ to select the time you want, then
press OK.
• You can also set it using the Remote Control. Refer to
"[Sleep Timer]" (p. 11).
• Available options are: Off / 10min / 20min / 30min / 60min /
90min / 120min / 180min / 240min.

[Auto Standby]

You can set the time to turn off the display power
automatically.
In spite of this setting, the unit goes into standby mode
automatically if there is no signal input from the
antenna terminal and no user operation for 15 minutes.
2
Use ▲ / ▼ to select [Auto Standby], then press
OK.
3
Use ▲ / ▼ to select the time you want, then
press OK.
• Available options are: Off / 3hours / 4hours / 5hours.

[OSD Timer]

You can set the time to turn off the OSD display.
2
Use ▲ / ▼ to select [OSD Timer], then press
OK.
3
Use ▲ / ▼ to select the time you want, then
press OK.
• Available options are: Off / 5sec / 10sec / 15sec / 20sec /
25sec / 30sec.
Sleep Timer
Auto Standby
OSD Timer
Menu Enter

Option Settings

You can change other settings.
1
Use ◄ / ► to select [OPTION].
Off
4 H
15 S
Exit

[OSD Language]

You can select the preferred on screen language.
2
Use ▲ / ▼ to select [OSD Language] and then
select the language you want using ◄ / ►.
• Available languages are: English, Thai, Malay, Simplified
Chinese, Arabic, Persian, Indonesian, Vietnamese and
French.
[TT Language]
You can select the preferred teletext language.
2
Use ▲ / ▼ to select [TT Language], then press
OK.
3
Use ▲ / ▼ to select the language you want, then
press OK.
• Available languages are: West, East, Russia, Arabic and
Farsi.

[Aspect Ratio]

You can change TV Screen Display mode.
2
Use ▲ / ▼ to select [Aspect Ratio], then press
OK.
3
Use ▲ / ▼ to select the display mode you want,
then press OK.
• Available options are: [4:3] / [16:9] / [Zoom1] / [Zoom2] /
[Just Scan] / [Dot by Dot].
• For details, refer to "Picture Format" (p. 12)

[Blue Screen]

If you set to [On], the background screen displays
blue, during no input signal.
2
Use ▲ / ▼ to select [Blue Screen], then select
[On] or [Off] using ◄ / ►.
OSD Language
TT Language
Aspect Ratio
Blue Screen
Key Lock
OPTION
Reset
Software Update(USB)
Move Menu
English
West
16:9
Off
Off
Enter Exit
21