DETAIL SETTINGS
Read this first
Before adjust each setting, press MENU to display the
menu.
To exit the menu, press EXIT.
Channel Settings
You can edit the channel settings.
1
Use
/
to select [CHANNEL].
CHANNEL
Move
[Auto Tuning]
You can scan the channels in your area automatically.
2
Use
/
to select [Auto Tuning], then press
OK to start scanning.
• When the scanning is completed, the lowest memorised
channel will be displayed.
• If you press MENU during the scanning, this operation will
be stopped and a confirmation display will appear, then you
can cancel scanning.
[ATV Manual Tuning]
You can search channels manually in your area.
2
Use
/
to select [ATV Manual Tuning], then
press OK.
3
Use
/
to select [Current CH], then use
to select the channel you want.
4
Use
/
to select [Color System], then use
/
to select the system you want.
5
Use
/
to select [Sound System], then use
/
to select the system you want.
6
Use
/
to select [Fine Tune], then use
to adjust the setting.
7
Use
/
to select [AFC], then use
select [On] or [Off].
• If you set to [On], this unit searches a near channel
automatically.
18
Auto Tuning
ATV Manual Tuning
Programme Edit
Menu
Select
8
Use
search a channel.
[Programme Edit]
You can edit the programme settings.
2
Use
press OK to enter Programme Edit list.
[Delete] (RED) :
Press RED to delete the current channel.
[Rename] (GREEN) :
Press GREEN and use
current channel name.
• Using alphabet by the Number buttons,
correspondence table shown below.
[Move] (YELLOW) :
Press YELLOW and use
channel.
[Skip] (BLUE) :
Press BLUE to skip the current channel.
[FAV] (FAV) :
Exit
Press FAV to register the current channel.
Number buttons and alphabet correspondence table
Number button
1
2
3
4
5
6
7
8
9
0
/
/
/
to
/
to select [Search], then use
/
to select [Programme Edit], then
/
/
/
to move the current
1st
2nd
A
B
D
E
G
H
J
K
M
N
P
Q
S
T
V
W
Y
Z
+
-
/
to
/
to change the
3rd
4th
C
1
F
2
I
3
L
4
O
5
R
6
U
7
X
8
9
.
0