DETAIL SETTINGS
Read this first
Before adjust each setting, press MENU to display the
menu.
To exit the menu, press EXIT.
Channel Settings
You can edit the channel settings.
1
Use ◄ / ► to select [CHANNEL].
CHANNEL
Move
[Auto Tuning]
You can scan the channels in your area automatically.
2
Use ▲ / ▼ to select [Auto Tuning], then press
OK to start scanning.
• When the scanning is completed, the lowest memorised
channel will be displayed.
• If you press MENU during the scanning, this operation will
be stopped and a confirmation display will appear, then you
can cancel scanning.
[ATV Manual Tuning]
You can search channels manually in your area.
2
Use ▲ / ▼ to select [ATV Manual Tuning], then
press OK.
3
Use ▲ / ▼ to select [Current CH], then use ◄ /
► to select the channel you want.
4
Use ▲ / ▼ to select [Color System], then use ◄
/ ► to select the system you want.
5
Use ▲ / ▼ to select [Sound System], then use
◄ / ► to select the system you want.
6
Use ▲ / ▼ to select [Fine Tune], then use ◄ / ►
to adjust the setting.
7
Use ▲ / ▼ to select [AFC], then use ◄ / ► to
select [On] or [Off].
• If you set to [On], this unit searches a near channel
automatically.
18
Auto Tuning
ATV Manual Tuning
Programme Edit
Menu
Enter
8
Use ▲ / ▼ to select [Search], then use ◄ / ► to
search a channel.
[Programme Edit]
You can edit the programme settings.
2
Use ▲ / ▼ to select [Programme Edit], then
press OK to enter Programme Edit list.
[Delete] (RED) :
Press RED to delete the current channel.
[Rename] (GREEN) :
Press GREEN and use ▲ / ▼ / ◄ / ► to change the
current channel name.
[Move] (YELLOW) :
Press YELLOW and use ▲ / ▼ to move the current
channel.
[Skip] (BLUE) :
Press BLUE to skip the current channel.
[FAV] (FAV) :
Press FAV to register the current channel.
Exit