Installing The Sim Card, Battery, And Storage Card - HTC Tilt 2 NMRHOD00 User Manual

2 Chapter 1 Getting Started
1. Installing the SIM Card, Battery, and Storage
Card
You need to remove the back cover before you can install the SIM
card, battery and storage card. Also, make sure to always turn off the
power before installing or replacing the SIM card and battery.
To remove the back cover
1.
Make sure your device is turned off.
2. Remove the stylus.
Note You need to temporarily remove the stylus
. Firmly hold the device with both hands and
the front panel facing down.
.
Push the back cover up with your thumbs
until it disengages from the device and then
slide it up to remove.
SIM card
The SIM card contains your phone number, service details, and
phonebook/message memory. Your device supports both 1.8V and 3V
SIM cards.
Note Some legacy SIM cards may not function with your device. You should
consult with your service provider for a replacement SIM card. There
may be fees for this service.
to be able to remove or replace the back
cover.