212 Chapter 12 Camera and Multimedia
•
Quality. Select the image quality level for captured photos.
•
Capture Format (Video, MMS Video, and Video Share modes).
Select the file format for recorded videos.
•
Time Stamp (Photo mode). Include the date and time on
captured photos.
•
Storage. Select where to save photos and videos. You can
either save the files to the main memory, or to a storage card if
available.
•
Keep Backlight. Turn the backlight on or off. This overrides your
device backlight settings while you are using the camera.
•
Shutter Sound. Play a shutter sound when you tap the Virtual
Camera button.
•
Image Properties. Adjust the Contrast, Saturation, and Sharpness
before capturing.
•
Effect. Apply a special effect to your photos or videos.
•
Metering Mode. Select a metering mode to allow the camera to
measure the amount of light and calculate the best-fit exposure
value before capturing.
•
Prefix. The file name of a newly captured photo or video is set
to "IMAGE" or "VIDEO" followed by a sequential number, for
example: IMAGE_001.jpg. You can also choose the current date
or date and time as the file name prefix.
Note You can not change the file name prefix when saving captured
•
Counter. Reset the file naming counter back to 1.
photos to a storage card. Captured photos are named using the
convention IMAGnnnn.jpg (where 'nnnn' is the counter), and are
saved to the \DCIM\100MEDIA folder on the storage card.