Setting Port Vlan Filtering; Setting Port Fame Type Filtering - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (Ethernet Switching Volume)
St-
Command
ep
1
ZXR10(config)#
2
ZXR10(config-if)#
native vlan {<vlan-id>|<vlan-name>}
St- Command
ep
1
ZXR10(config)#
2
ZXR10(config-if)#
le}
St-
Command
ep
1
ZXR10(config)#
2
ZXR10(config-if)#
14 Confidential and Proprietary Information of ZTE CORPORATION
Trunk port and hybrid port belong to multiple vlans and they need
to set native vlan. If native vlan is set on port, when one frame
with no vlan tag is received on port, it will be forwarded to the port
belonging to this native vlan. Native vlan of trunk port and hybrid
port is vlan 1 by default.
interface < interface-name>
switchport {trunk | hybrid}

Setting Port VLAN Filtering

interface < interface-name>
ingress filtering {enable|disab
After enabling ingress filtering, if this ingress doesn't belong to the
VLAN that frame received on the port belongs to, the frame will be
dropped.

Setting Port Fame Type Filtering

interface < interface-name>
acceptable frame types {all|tag}
This command is used to configure the type of frame that can be
accepted by port. User can choose to accept all frames (including
tagged frames and tagged frames) or only accept tagged frames.
Function
This accesses L2 interface on
switch.
This sets native VLAN of trunk
port and hybrid port.
Function
This accesses L2 interface on
switch.
This sets port VLAN filtering.
VLAN ingress filtering is
enabled by default.
Function
This accesses L2 interface on
switch.
This sets port fame type for
filtering.