Front Panel Description - Krell Industries Showcase DVD Player Instructions For Use Manual

Front Panel Description

See Figure 1 on page 8
Power
Disc Functions
Krell Showcase DVD
1 Power Button or Key
Use this button or key to switch the Showcase DVD from the
stand-by to the operational mode.
2 Power LED
The blue power LED illuminates when the Showcase DVD is in
the operational mode.
3 Stand-by LED
The red stand-by LED illuminates when the Showcase DVD is
plugged into AC power and is in the stand-by mode.
4 Front Infrared Sensor
The infrared sensor receives commands from the Showcase
DVD remote control when the IR select switch (37) is in the up
position. For proper remote control operation, make sure the
infrared sensor is not covered or obstructed.
5 Repeat Button or Key
Use this button or key to activate and deactivate disc repeat
options. See also: To Play a DVD or VCD, page 20; To Play an
Audio CD, page 24; To Play an MP3 Disc, page 27.
6 Pause Button or Key
Use this button or key to pause disc playback. The phrase
appears briefly in the status window in the upper left corner of the
television. To resume playback, press the pause button or key
again, or press the play button or key (8).
7 Stop Button or Key
Use this button or key to stop disc playback. A status window
appears in the upper left corner of the television screen, followed
by a temporary feedback field icon. If you are playing a
RESUME
DVD or VCD, press play (8) when the
resume playback from the stop point. If you do not press play
while icon is on the screen, the DVD starts playing from
RESUME
the first title and chapter.
8 Play Button or Key
Use this button or key to begin or resume disc playback.
9 Track Forward Button or Key
Track Forward. Use this button or key to move forward one
chapter or track. The mode selected appears in a status window
in the upper left corner of the television screen. The front panel
display (13) shows the currently playing chapter or track number.
PAUSE
icon appears, to
RESUME
9