Structural Characteristics - Electrolux Diva Service Manual

1.7 STRUCTURAL CHARACTERISTICS

This convertible modular dishwasher is designed for maximum flexibility, and can be installed in the
FREE-STANDING or BUILT-IN versions.
Structure
MODULAR
By removing the work top, the dishwasher
can be inserted beneath a sink or a pre-
existing work-top in marble or wood, on
condition that the dimensions of the
compartment are as shown in the figure.
1.7.1 INTERNAL CHARACTERISTICS
1. Upper basket guide
2. Water softening level selector (if featured)
3. Salt container cap (if featured)
4. Detergent/rinse-aid dispenser
5. Control panel
6. Serial number plate
7. Central filter (drain)
8. Main filter (washing)
9. Lower spray arm
10. Upper spray arm
11. Upper basket
12. Work-top (free-standing versions only)
SOI/TD - PR
Version
FREE-STANDING
11/32
This type of dishwasher is designed for installation
beneath a sink or a pre-existing work-top in marble or
wood, on condition that the dimensions of the
compartment are as shown in the figure. The feet can
be adjusted to a maximum of 80 mm. The rear foot is
adjusted from the front of the appliance.
Version
BUILT-IN
599 38 72-30