Answering System Display Messages - GE 28203 User Manual

PAGING or
PAGING FROM
REPT
ROOM
MONITORING....
SEARCHING
SPKR
UNKNOWN NAME/
CALLER/NUMBER

Answering System Display Messages

The following messages show the status of the answering system or
help you set up and use the system.
0-59
CL (blinking)
- -
IN (blinking)
F (blinking)
Six bars (blinking)
announcement.
LA (Line Access)
An (blinking)
Someone pressed the page button on the
base or delete/int/conf button on the
handset.
Indicates a repeat call message. Indicates a
new call from the same number was received
more than once.
The audio link between handsets is
established.
Indicates handset is searching for the base.
Indicates the handset is in speakerphone
mode.
The incoming call is from an area not serviced
by CID or the CID information was not sent.
Indicates the total number of messages.
The voice time/day stamp needs to be set.
Answering system is turned off.
The system is answering a call.
Answering system memory is full.
The system is recording a memo or an
External line remote answering system.
Answering system is in announcement only
mode.
55