Activate Your Phone - HTC Evo 4G LTE User Manual

2. Plug the other end of the USB cable into the charger/accessory jack on the upper right
side of your phone.
3. Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to
three hours.
Note: Your phone's battery should have enough charge for the phone to turn on and find a
signal, run the setup application, set up voicemail, and make a call. You should fully
charge the battery as soon as possible.
4. Press and hold
If your phone is activated, it will turn on, search for service, and begin the setup application. If
your phone is not yet activated, see

Activate Your Phone

Depending on your account or how and where you purchased your phone, it may be ready to
use or you may need to activate it on your Sprint account.
● If you purchased your phone at a Sprint Store, it is probably activated and ready to use.
● If you received your phone in the mail and it is for a new Sprint account or a new line of
service, it is designed to activate automatically.
● When you turn the phone on for the first time, you should see a Hands Free Activation
screen, which may be followed by a PRL Update screen and a Firmware Update
screen. Follow the onscreen instructions to continue.
● If you received your phone in the mail and you are activating a new phone for an existing
number on your account (you're swapping phones), you can activate on your computer
online or directly on your phone.

Activate on your computer:
•
Go to sprint.com/activate
phone.

Activate on your phone:
Get Started
to turn the phone on.
Activate Your Phone
and complete the online instructions to activate your
4
for more information.