Activate Your Phone - HTC One User Manual

2. Plug the other end of the USB cable into the charger/accessory jack on the bottom panel
of your phone.
3. Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to
three hours.
Note: Your phone's battery should have enough charge for the device to turn on and find a
signal, run the setup application, set up voicemail, and make a call. You should fully
charge the battery as soon as possible.
4. Press and hold the Power button (
the phone vibrate when it has been turned on.
Your device will search for service, and begin the setup application.

Activate Your Phone

Follow the instructions below to activate your phone if it has not already been activated.
Depending on your account or how and where you purchased your phone, it may be ready to
use or you may need to contact your wireless service provider.
● If you purchased your phone at a store, it is probably activated and ready to use.
● If you received your phone in the mail and it is for a new wireless account or a new line
of service, it is designed to activate automatically.

When you turn the phone on for the first time, you should see a Hands Free
Activation screen, which may be followed by a PRL Update screen and a Firmware
Update screen. Follow the onscreen instructions to continue.
● If you received your phone in the mail and you are activating a new phone for an existing
number on your account (you're swapping phones), you will need to contact your
wireless service provider to activate the number on your new phone.
To confirm activation, make a phone call. If your phone is still not activated or you do not have
access to the Internet, contact your wireless service provider.
Get Started
) to turn the phone on. You will feel or hear
2