Alpine IVA-M700R Owner's Manual page 220

1
6
8
"
$
220
ENT
A.PROC DEFEAT
MUTE
ROUTE
POS. DEST.
LO.PT.
ZOOM
TUNER DISC CHG
V.SEL
POWER
NAVI
NAVI OFF
POWER
1 2
3
4 5
6
7 8
9
DEL 0 OK
Remote Control (RUE-4167
supplied with IVA-M700R/CVA-1005R)
Basic Mode
1 Remote Control Signal Transmitter
2 Signal Transmitter Indicator
2
3 Rotary Encoder/Volume Control
Rotate to the right or left in the same manner
as for the Rotary Encoder on IVA-M700R/
3
CVA-1005R.
4 NAVI/AUDIO Switch
4
NAVI:
5
AUDIO: Select this position to activate Audio
5 ENT (Enter) Button
Press to execute the selection. (The same
function as the rotary encoder on IVA-M700R/
CVA-1005R.)
:/J Button
Press and hold this button for more than 2
7
seconds to play or pause.
6 A.PROC (Audio Processor) Button
9
Switches the audio processor modes such
as equaliser, surround, etc.
!
7 MUTE Button
Press the button to lower the volume level by
20 dB instantly. Press the button again to
return to the previous volume level.
8 TUNER Button
Press the button to select the radio mode.
9 DISC Button
Press to switch to the CD/MD mode.
! CHG (Changer) Button
Press to switch to the changer mode.
" POWER Button
Press to turn the power On or Off.
# Numeral Keys
The key numbers from 1 to 7 have the same
#
functions as for the 1 to FUNC buttons on
∗
IVA-M700R/CVA-1005R.
$ DEL (Angle Down) button
&
Pressing this button changes the monitor
angle downward.
%
% "O" (Open/Close) Button
• When the monitor is closed: raises the
monitor.
• When the monitor is open: adjusts the
monitor angle back and forth.
• When the "O" (Open/Close) button is
pressed and held for more than 2 seconds,
the monitor is housed into the monitor
compartment.
& "OK" (Angle Up) Button
Changes the monitor angle upward.
* Not used.
Select this position to activate
Navigation mode.
mode.
English