Alpine IVA-M700R Owner's Manual page 144

1
2
3
144
1 5
2
3 4
RETURN
T-CORR
Audio Processor
Operation (Optional)
Adjusting Time-
Correction for 2-Way
Speaker System
Use this procedure to adjust the sound time
difference between the speakers.
Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
Press the 3 (T-CORR) button.
The mode changes to the Time Correction
Adjustment mode.
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way divider is connected:
→ L-Low → R-Low → F-High/L
R-High/R ← R-High/L ← F-High/R ←
When two 2-way dividers are connected:
→ L-Low → R-Low → L-High → R-High
Each time the 6 (F/R) button is pressed,
↑
the mode switches between the Front
adjustment and Rear adjustment modes,
↓
and the display also changes.
→ L-Low → R-Low → L-High → R-High
When only one 3-way divider is connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
When two 3-way dividers are connected:
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
↑ Each time the 6 (F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
↓
and the display also changes.
→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High
English
(To be continued)