Extern Menu - Clavia Nord Stage EX User Manual

11. System functions: Extern menu
E
XTERN MENU
Press S + E
HIFT
to the Extern section - see
between the various menu items on the menu. The V
are done, press E
Most items on the Extern menu have separate entries for Panel A and B! Most settings from the Ex-
tern menu are saved with a Program. The only exceptions are the "Extern MIDI A/B Channel" if Ex-
tern MIDI Mode is set to Global, and "Send on Load".
The following items can be found on the Extern menu:
Function
Extern MIDI
Mode
Extern MIDI A/B
Channel
Extern MIDI A/B
Volume
Extern MIDI A/B
Prog Change
Extern MIDI A/B
Bank Sel cc00
Extern MIDI A/B
Bank Sel cc32
Extern MIDI A/B
CC Value
Extern MIDI A/B
CC Number
Extern MIDI A/B
Send Wheel
Extern MIDI A/B
Send A.Touch
Extern MIDI A/B
Send CtrlPed
Extern MIDI A/B
Vel Curve
Extern MIDI
Send on Load
Page 70
to access the Extern menu, where you can find settings and functions relating
XTERN
"The Extern section" on page
(S ) briefly to exit the menu.
XIT HIFT
Description
The Extern MIDI Channel can be determined in two different
ways, globally, or independently for each program. When "Glo-
bal" is selected, the Extern MIDI A & B channels will be the same
for all programs. If Program is selected, the Extern MIDI A & B
channel will be saved with each Stage EX program.
This sets the MIDI channel the Extern section should use .
The Extern section can send MIDI Volume messages (0-127),
allowing you to control the level of the external device.
The Extern section can transmit MIDI Program Change mes-
sages (0-127), allowing you to change programs on external
devices.
This allows you to set a value for a MIDI Bank Select message
on Control Change address 00 (cc00).
This allows you to set a value for a MIDI Bank Select message
on Control Change address 32 (cc32).
Note that there are many different variations between instru-
ments in how Banks are numbered and accessed via MIDI.
This will transmit values for the selected MIDI CC number.
This decides which MIDI Controller number the Extern section
should be transmitted when MIDI CC is activated.
To avoid transmitting Modulation Wheel messages make sure
this option is set to "No".
To avoid transmitting After Touch messages make sure this
option is set to "No".
To avoid transmitting Expression Pedal messages make sure
this option is set to "No".
Use this setting to adjust the velocity response curves in the
Extern section.
To avoid transmitting Program Change, Volume or MIDI CC mes-
sages when you load a Program in Nord Stage EX, make sure
"Send On Load" is set to "Off" on the Extern menu.
63. Use the P
AGE
D is used to change settings. When you
ALUE IAL
Nord Stage EX v6.x
-/+ buttons to navigate
Range/Values
Global, Program
1-16 (14 default for
Panel A, 15 is
default for Panel B)
Off (Default), 0-127
Off (Default), 1-128
Off, 0-127
Off (Default), 0-127
Off (Default), 1-127
MIDI CC 0-119
(Default is 2)
Yes (Default), No
Yes (Default), No
Yes (Default), No
Norm (Default),
Soft, Hard
No (Default), Yes