Table of Contents
Advertisement
Nord Stage EX v6.x
E
1
FFECT
The Effect 1 section offers six different types of modulation. Use the S
to switch between the available modulation effects. The following effects are available:
RM (R
ING MODULATION
Ring Modulation is a type of modulation where two signals are multiplied with each
other. The result is an inharmonic "bell like" sound. Herbie Hancock used this effect a
lot in the '70s. In the Nord Stage EX the instrument signal is multiplied with an addi-
tional sinewave.
When RM is selected you set the sinewave pitch with the R
amount of ring modulation with the A
T
(T
REM
REMOLO
Tremolo is basically volume modulation that continuously varies the output signal volume. Tremolo
is a commonly used modulation, especially for Wurlitzer electric pianos.
The Tremelo effect is stereo in/out.
Use the R
/T
ATE
put volume is at maximum level at zero A
A-P
(A
AN
UTO
The A-Pan is an auto panning modulation that smoothly pans the signal between the Left and Right
outputs.
You control the rate and amount of panning with the R
effect is stereo in/out.
S
P
TATIC
AN CONTROL OF AN
Sometimes you may want absolute manual control of over the panning of an instrument. This can be
done with the A-Pan effect as follows:
• Enable Effect 1 for the instrument you want to pan, and select the A-Pan effect type.
• Set the R
/T
ATE
field manually with the A
W
-W
AH
AH
The Wah-Wah modulation is often used for electric guitars to get that characteristic "talking guitar"
sound. Wah-Wah can also be extremely useful on electric piano sounds. Try out the Clavinet sound
)
MOUNT
)
The filled curve indicates maximum
dashed curves indicate lower
A
MOUNT
and A
knobs to control the Tremolo rate and depth. Note that the out-
EMPO
MOUNT
P
)
AN
The filled curve indicates maximum
dashed curves indicate lower
smoothly pans between the Left and Right outputs as indicat-
I
NSTRUMENT
to zero. Then you can place the instrument anywhere in the stereo
EMPO KNOB
knob, just like a pan control on a mixer.
MOUNT
ATE
knob. This effect is mono in/out.
A
MOUNT
value the output level is constantly at maximum level
setting.
MOUNT
A
MOUNT
/T
ATE
EMPO
7. The Effects: The Panel effects
button
ELECTOR
/T
knob and the
EMPO
A
value and the
MOUNT
values. At zero
A
value and the
MOUNT
values. The signal
and A
knobs. The Pan
MOUNT
Page 51
Advertisement
Table of Contents
