Table of Contents
Advertisement
11. System functions: System menu
11. S
YSTEM FUNCTIONS
The System functions are divided into four menus; System, Sound, MIDI and Extern. Press S
and the corresponding button in the Program section to access the desired menu.
To leave a menu at any time, press the E
All changes you make to the system functions are automatically stored in Nord Stage EX, except the
Local On/Off setting, which is always set to Local On at power on.
S
YSTEM MENU
Press S
+ S
HIFT
different pages. Push a P
ly. Use the V
ALUE
exit the menu.
The following items can be found on the System menu:
Function
Transpose
Fine Tune
Audio Routing
Mode
Organ Audio
Output
Piano Audio A/B
Output
Page 66
to enter the System menu. Use the P
YSTEM
button once to step through the menu, or hold the button to scroll quick-
AGE
D
to change the settings. When you are done, press E
IAL
Description
Transpose allows you transpose the pitch of instru-
ments up or down in semitone steps
Fine Tune can be used to adjust the pitch of instru-
ments in finer increments.
The output routing of the instruments in the Nord
Stage can be determined in two different ways, glo-
bally, or independently for each program. When "Glo-
bal" is selected, the output routings will be the same
for all programs, and the global settings will override
the routings stored with each program.
This allows you to set which channel output pairs (or
mono output) to use for the Organ section. Note that
you cannot have different routings for Organ A and B.
If the Audio Routing Mode (see above) is "Program",
this setting will be saved with the program.
This allows you to set which channel output pairs (or
mono output) to use for the Piano A and B sections.
Use the Panel A & B buttons to access the settings
for each panel. If the Audio Routing Mode (see
above) is set to "Program", these settings will be
saved with the program.
(S
) button briefly.
XIT
HIFT
AGE
.
Nord Stage EX v6.x
-/+ buttons to navigate between the
(S
XIT
HIFT
Range/Values
-/+ 6 semitones (in steps of
1 semitone). Default value
is "0" (no transpose).
+/- 50 Cents (half a semi-
tone). Default value is "0"
(no fine tune).
Global (Default), Program
"1 & 2" (Default), "3 & 4",
"3" ,"4"
"1 & 2" (Default), "3 & 4",
"3" ,"4"
HIFT
) briefly to
Advertisement
Table of Contents
