Shift Functions; Accessing The Shift Functions - Clavia nord lead Owner's Manual

Shift Functions

9. Shift Functions

Accessing The Shift Functions

Some functions do not have dedicated buttons, but share buttons with other functions and settings. These
are called the Shift Functions and are printed in blue on the front panel.
Selecting a Shift Function
1. Hold down the Shift button.
2. Press any of the buttons labelled "Tune" to "System".
Most of the front panel LEDS go out and the program display now shows the selected function.
... and press one of these seven buttons.
A
TUNE
DUMP ALL
3. If the Function button you pressed is used for more than one parameter, press it repeatedly until the display
shows the desired function.
If you for example selected the "Prg.Ctrl" button, the left digit in the display switches between "P" (Pro-
gram) and "C" (Controllers) when you press it.
Press the function button to switch between the possibilities. In this picture the Program
(P) and Controller (C) functions.
A
TUNE
When a Function button is used for more than one param-
eter, the two digits are separated by a dot. The first digit
then indicates the parameter, and the second the value.
Hold down the Shift button....
B C
OUT MODE LOCAL
OCT SHIFT
DUMP ONE
Program Program
STORE
B C D
OUT MODE LOCAL PRG.CTRL.
D
UNISON
PRG.CTRL. MIDI CH
Pitch bend
TUNE
MONO AUTO
SPECIAL SYSTEM
LFO 1
OSC 2
FM AMT
FILTER
SHIFT
MORPH
Program Program
STORE
A B C
OUT MODE LOCAL PRG.CTRL.
Page 55
D