Certification And Classification Information; Laser Product Label; International Notices And Statements; Canadian Notice (Avis Canadien) - HP StorageWorks SN6000 Installation And Reference Manual

Fibre channel switch

Hide thumbs Also See for StorageWorks SN6000:

Table of Contents

Certification and classification information

This product contains a laser internal to the fiber optic (FO) transceiver for connection to the Fibre Channel

communications port.

In the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements

contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. A

label on the plastic FO transceiver housing indicates the certification.

Outside the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements

contained in IEC 825–1:1993 and EN 60825–1:1994, including Amendment 1 1:1996 and Amendment

2:2001.

The optional Class 1 laser product label

HP-supplied laser device or on the laser device installed in your product.

Figure 25

Class 1 laser product label

This label indicates that the product is classified as a CLASS 1 LASER PRODUCT.

This equipment does not exceed Class A limits for radio emissions for digital apparatus, set out in Radio

Interference Regulation of the Canadian Department of Communications. Operation in a residential area

may cause unacceptable interference to radio and TV reception requiring the owner or operator to take

whatever steps necessary to correct the interference.

Cet équipement ne dépasse pas les limites de Classe A d'émission de bruits radioélectriques por les

appareils numériques, telles que prescrites par le Réglement sur le brouillage radioélectrique établi par le

ministère des Communications du Canada. L'exploitation faite en milieu résidentiel peut entraîner le

brouillage des réceptions radio et télé, ce qui obligerait le propriétaire ou l'opérateur à prendre les

dispositions nécwssaires pour en éliminer les causes.

(Figure

25) or its equivalent may be located on the surface of the

Table of Contents