HP ProCurve Series Installation And Getting Started Manual page 54

Installing the Switch
Sample Network Topologies
When any two 10-GbE ports are in a linked state, each port automatically
operates on its own channel, which guarantees 10 Gbps of bandwidth for each
port. However, when more than two ports are in a linked state, ports A1 and
A4 are statically mapped to share one 14.4 Gbps channel, while ports A2 and
A3 are statically mapped to share the other 14.4 Gbps channel.
To summarize:
■
■
For example, in an application where three ports are needed and it is impor-
tant to ensure that port 1 always has a full 10 Gbps available, the connection
choices shown in the next figure would be used.
Figure 2-26. Guaranteeing 10 Gbps on a specific port.
2-32
If only one port in a given channel is in a linked state, then that port
operates at wire speed and the other port uses no bandwidth.
If both ports in a given channel are in a linked state, then the 14.4 Gbps of
bandwidth is balanced fairly between the two ports.
5400zlSwitch 5400zlSwitch 5400zlSwitch
with 10 - GbE Module with 10 - GbE Module with 10 - GbE Module
Port A1 is guaranteed 10
Gbps because it does
not need to share the
channel with port A4
A1
(X2
14.4 Gbps
5400zlSwitch 5400zlSwitch 5400zlSwitch
with 10 - GbE Module with 10 - GbE Module with 10 - GbE Module
Port 4 is Port 4 is
not used not used
1 4 2 3
A4 A2 A3
) ) ) )
(X2 (CX2 (CX2
14.4 Gbps 14.4 Gbps
Channel Channel
14.4 Gbps
- GbE Module Ports
Channel Channel
10-GbE Ports
Switch
Ports A2 and A3 share this chan
in a trunked link, which fairly in a trunked link, which fairly
balances the 14.4 Gbps balances the 14.4 Gbps
bandwidth between the two port