Switch Software Downloads - HP PROCURVE 6120 Management And Configuration Manual

Switch Memory and Configuration
Using Primary and Secondary Flash Image Options
1. In this example show
version indicates the
switch has version Z.14.04
in primary flash.
2. After the boot system
command, show version
indicates that version
Z.14.04 is in secondary
flash.
Figure 6-9. Determining the Software Version in Primary and Secondary Flash
6-16
switch from the opposite flash image and using show version again, you can
determine the version(s) of switch software in both flash sources. For exam-
ple:
ProCurve(config)# show version
Image stamp:
Boot Image:
ProCurve(config)# boot system flash secondary
Device will be rebooted, do you want to continue [y/n]? y
ProCurve(config)# show version
Image stamp:
Boot Image:

Switch Software Downloads

The following table shows the switch's options for downloading a software
version to flash and booting the switch from flash
Table 6-1. Primary/Secondary Memory Access
Action
Download to Primary
Download to Secondary
Boot from Primary
Boot from Secondary
a.This download simply reloads the image.
The different software download options involve different copy commands,
plus xmodem, usb, and tftp. These topics are covered in Appendix A, "File
Transfers".
/sw/code/build/vern(t4br)
Jul 27 2009 13:42:40
Z.14.04
1037
Primary
/sw/code/build/vern(t4br)
Jul 27 2009 13:42:40
Z.14.04
1037
Secondary
Menu CLI
Yes Yes
No Yes
Yes Yes
No Yes
Web SNMP
Browser
Yes Yes
a
Yes
Yes
Yes Yes
No Yes