SOYO SY-6ILA User Manual page 27

Socket 370 for intel celeron processor intel 440 lx agp/pci motherboard 66mhz front side bus supported atx form factor

Hide thumbs Also See for SY-6ILA:

Table of Contents

Hardware Setup

2. Select [STANDARD CMOS SETUP]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to

"Auto".

3. Select [SOYO COMBO SETUP]

Move the cursor to the [CPU Frequency] field to set the CPU

frequency, as shown in the following display.

Available [CPU Frequency] settings on your SY-6ILA Motherboard

are detailed in the following table. You are then required to fill in the

next two consecutive fields: (1) the CPU Host/PCI Clock, and (2) the

CPU Frequency.

CPU Frequency

300AMHz (66 x 4.5)

333MHz (66 x 5.0)

366MHz (66 x 5.5)

400MHz (66 x 6.0)

433MHz (66 x 6.5)

Note: if you use Bus Frequencies of 75 MHz, make sure that

your PCI cards can cope with the higher PCI clock.

Select the working frequency of your

Celeron

processor among these preset

values.

Note:

Mark the checkbox that

corresponds to the working frequency of

your Celeron

processor in case the

CMOS configuration should be lost.

SY-6ILA

Table of Contents