Wireless; Wireless Network - EnGenius Wireless Outdoor Access Point & Client Bridge User Manual

Wireless outdoor access point & client bridge

Table of Contents

Long Range Wireless Access Point / Client Bridge

5.4 Wireless

The Wireless Network page allows you to configure the wireless mode, channel,

SSID, and security settings.

Wireless Mode: Depending on the type of wireless clients that are connected to the

network, you may select B, G, or B/G-mixed. If you are not sure about which clients

will be accessing the wireless networks, it is recommended that you select B/G-

mixed for the best performance.

SSID: The SSID is a unique named shared amongst all the points of the wireless

network. The SSID must be identical on all points of the wireless network and cannot

exceed 32 characters. You may specify an SSID or select one from the Site Survey.

Site Survey: Click on the Site Survey button in order to scan the 2.4GHz frequency

for devices that broadcast their SSID. Click on the BSSID link to connect to the

Access Point. Click on the Refresh button to re-scan the frequency.

4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Click on the Wireless link on the

navigation drop-down menu. You will

then

see

three

options:

network, wireless security, and wireless

advanced

settings.

Each

described below.

Version 1.0

wireless

option

Table of Contents

Eoc1650