Tray Selection; Adjusting Brightness And Contrast - Brother MFC-9970CDW Advanced User's Manual

Chapter 7
d
Press d or c to display Duplex Copy.
Press Duplex Copy.
e
Press d or c to display the following
layout options:
2sidei2side,
1sidei2side LongEdgeFlip,
2sidei1side LongEdgeFlip,
1sidei2side ShortEdgeFlip,
2sidei1side ShortEdgeFlip,
Off
Press the option you want.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.

Tray selection

You can temporarily change the Tray Use
option for the next copy.
a
Press (COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Tray Use.
Press Tray Use.
e
Press MP>T1, MP>T1>T2
1
, Tray#1 Only,
T1>T2>MP
1
Tray#2 Only
1
T2 and Tray#2 Only appears only if the
optional lower tray is installed.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
To change the default setting for Tray
Use, see Tray Use in copy mode in
Chapter 2 of the Basic User's Guide.
48
1
, T1>MP,
or MP Only.
Adjusting Brightness and
Contrast
Brightness
Adjust the copy brightness to make copies
darker or lighter.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Brightness.
Press Brightness.
e
Press d to make a darker copy or press
c to make a lighter copy.
7
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Contrast
Adjust the contrast to help an image look
sharper and more vivid.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Contrast.
Press Contrast.
e
Press d to decrease the contrast or
press c to increase the contrast.
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
(COPY).
(COPY).
7
7
7